A sofa bunk bed is ideal for a room shared by two people. For a person using a room alone, the conversion of a bunk bed frame into a high bed opens about 20 square feet of floor space. The conversion is more than taking the bed down. Most frames on the bunk bed are based on the bottom bunk to stabilize the structure. Ideas for convert a sofa bunk bed to a loft, cut the 10-foot board into four 30-inch boards. Sand the tables. Paint the four 30-inch boards and the 80-inch board to match the frame of the bunk bed. If you cannot match the color exactly, consider a complementary color.
Mount the bunk according to the instructions that are included with the assembly. Although specifics vary, most will require a screwdriver and / or hex key. Skip the steps to install the bed frame below. Then for convert a sofa bunk bed to a loft set the 80-inch board against two legs of the frame along the side that is fixed against the wall. Lay is parallel to the floor and the mattress, approximately halfway between them. Screw in place with two wood screws by the connection point. Set a 30-inch diagonal board to fit both the platform for the sofa mattress and one leg on the same side as the 80-inch board. Screw in place with two wood screws.
12 Photos Gallery of: Convert A Sofa Bunk Bed To A Loft
Establish a 30-inch diagonal table that connects the mattress platform and the opposite leg on the same side as the first. Screw in place with two wood screws. Adjust by keeping the 30-inch boards at the ends of the frame, one at each end. Connect each one to one leg and the mattress platform. Screw in place with two wood screws. Then for convert a sofa bunk bed to a loft cut any corners that protrude, And then add touch-up nice paint to any place that was scratched or rang during construction. Put the sofa mattress in its place.loft boards